How do i paint the inside of my computer case??

i wanna paint the inside of my case and dont wanna go an expensive way like airbrush or automotive shop.....so what kind of spary can paint would be good for inside of case and how to i prep it....i also want to do same for outside of case. Color for outside i want it to be red and for the inside..blackHow do i paint the inside of my computer case??
Your computer case is just like a car. To prep it, remove the inners of the computer. You may want to take off the paint that is already on it. Paint thinner can do this, apply the thinner around the case, after while the paint will peel off. After doing this get rough sandpaper and sand the case inside and out. Get a cloth to wipe off the dust of the case. I guess if you are going to paint the inside of your case black, get a premier that is gray and spray it. You may want to get masking tape, this can be bought at the hardware store, and mask out the some of the areas that is the outside of the case. After the premier drys, sand the premier with a softer sandpaper. Then, spray on the black paint. You may want to spray on a couple of coats, it depends what you are going for. Between each coat you should sand it down because of limps and run off. Do the same on the outside of the case. For a premier for red, I suggest pink or light red. After everything is dried, I would spray on a clear cost, so it would shin. I suggest duplicolor paint.





I don't recommend you to paint the inside of your case black because it is hard to see if the inside is dirty. And painting the inside will attract a lot of dust.How do i paint the inside of my computer case??
Any spray pain will do. Remove everything from inside your case, dust it and clean it. Then paint it!. You will want to remove both sides of the case, as well as the front. On the front is usually a bunch of connectors that go to the motherboard. If you are unfamiliar with computers, I would recommend taking lots of pictures before you take things apart, so you will know where they go later on.





Other than that, you don't have to use any special paints or materials for it.





http://thebestcasescenario.com/





you can go to that link and find out a lot of information about computer case modding and maybe some ideas and how-to's
i dont understand why you want to paint the inside of your comp. case but just open it up.
uh why? its not going to better its preformance and it's not going to get you the ladies
use something good like rust-o-leum, or krylon. also ya might wanna coat the outside with some clear also. helps protect the finish. spray very lightly, take your time and spray multiple coats. modding cases is a fun way to personalize your case. don't forget to add stickers i.e. amd athlon, intel inside etc. like art, it is a personal form of expression. lol excuse my clear-case lmao.

urban decay cosmetics